Electrical overstress (EOS) and Electrostatic discharge (ESD) pose one of the most dominant threats to integrated circuits (ICs). These reliability concerns are becoming more serious with… mais…
Electrical overstress (EOS) and Electrostatic discharge (ESD) pose one of the most dominant threats to integrated circuits (ICs). These reliability concerns are becoming more serious with the downward scaling of device feature sizes. Modeling of Electrical Overstress in Integrated Circuits presents a comprehensive analysis of EOS/ESD-related failures in I/O protection devices in integrated circuits. The design of I/O protection circuits has been done in a hit-or-miss way due to the lack of systematic analysis tools and concrete design guidelines. In general, the development of on-chip protection structures is a lengthy expensive iterative process that involves tester design, fabrication, testing and redesign. When the technology is changed, the same process has to be repeated almost entirely. This can be attributed to the lack of efficient CAD tools capable of simulating the device behavior up to the onset of failure which is a 3-D electrothermal problem. For these reasons, it is important to develop and use an adequate measure of the EOS robustness of integrated circuits in order to address the on-chip EOS protection issue. Fundamental understanding of the physical phenomena leading to device failures under ESD/EOS events is needed for the development of device models and CAD tools that can efficiently describe the device behavior up to the onset of thermal failure. Modeling of Electrical Overstress in Integrated Circuits is for VLSI designers and reliability engineers, particularly those who are working on the development of EOS/ESD analysis tools. CAD engineers working on development of circuit level and device level electrothermal simulators will also benefit from the material covered. This book will also be of interest to researchers and first and second year graduate students working in semiconductor devices and IC reliability fields. | Modeling of Electrical Overstress in Integrated Circuits by Carlos H. Diaz Hardcover | Indigo Chapters Books > Science & Nature > Science > Technology > Electronics P10117, Carlos H. Diaz<
Indigo.ca
new in stock. Custos de envio:zzgl. Versandkosten., mais custos de envio Details...
(*) Livro esgotado significa que o livro não está disponível em qualquer uma das plataformas associadas buscamos.
Electrical overstress (EOS) and Electrostatic discharge (ESD) pose one of the most dominant threats to integrated circuits (ICs). These reliability concerns are becoming more serious wi… mais…
Electrical overstress (EOS) and Electrostatic discharge (ESD) pose one of the most dominant threats to integrated circuits (ICs). These reliability concerns are becoming more serious with the downward scaling of device feature sizes. Modeling of Electrical Overstress in Integrated Circuits presents a comprehensive analysis of EOS/ESD-related failures in I/O protection devices in integrated circuits. The design of I/O protection circuits has been done in a hit-or-miss way due to the lack of systematic analysis tools and concrete design guidelines. In general, the development of on-chip protection structures is a lengthy expensive iterative process that involves tester design, fabrication, testing and redesign. When the technology is changed, the same process has to be repeated almost entirely. This can be attributed to the lack of efficient CAD tools capable of simulating the device behavior up to the onset of failure which is a 3-D electrothermal problem. For these reasons, it is important to develop and use an adequate measure of the EOS robustness of integrated circuits in order to address the on-chip EOS protection issue. Fundamental understanding of the physical phenomena leading to device failures under ESD/EOS events is needed for the development of device models and CAD tools that can efficiently describe the device behavior up to the onset of thermal failure. Modeling of Electrical Overstress in Integrated Circuits is for VLSI designers and reliability engineers, particularly those who are working on the development of EOS/ESD analysis tools. CAD engineers working on development of circuit level and device level electrothermal simulators will also benefit from the material covered. This book will also be of interest to researchers and first and second year graduate students working in semiconductor devices and IC reliability fields. Books > Science & Nature > Science > Technology > Electrical List_Books, [PU: Kluwer Academic Publishers]<
Indigo.ca
new in stock. Custos de envio:zzgl. Versandkosten., mais custos de envio Details...
(*) Livro esgotado significa que o livro não está disponível em qualquer uma das plataformas associadas buscamos.
Electrical overstress (EOS) and Electrostatic discharge (ESD) pose one of the most dominant threats to integrated circuits (ICs). These reliability concerns are becoming more serious with… mais…
Electrical overstress (EOS) and Electrostatic discharge (ESD) pose one of the most dominant threats to integrated circuits (ICs). These reliability concerns are becoming more serious with the downward scaling of device feature sizes. Modeling of Electrical Overstress in Integrated Circuits presents a comprehensive analysis of EOS/ESD-related failures in I/O protection devices in integrated circuits. The design of I/O protection circuits has been done in a hit-or-miss way due to the lack of systematic analysis tools and concrete design guidelines. In general, the development of on-chip protection structures is a lengthy expensive iterative process that involves tester design, fabrication, testing and redesign. When the technology is changed, the same process has to be repeated almost entirely. This can be attributed to the lack of efficient CAD tools capable of simulating the device behavior up to the onset of failure which is a 3-D electrothermal problem. For these reasons, it is important to develop and use an adequate measure of the EOS robustness of integrated circuits in order to address the on-chip EOS protection issue. Fundamental understanding of the physical phenomena leading to device failures under ESD/EOS events is needed for the development of device models and CAD tools that can efficiently describe the device behavior up to the onset of thermal failure. Modeling of Electrical Overstress in Integrated Circuits is for VLSI designers and reliability engineers, particularly those who are working on the development of EOS/ESD analysis tools. CAD engineers working on development of circuit level and device level electrothermal simulators will also benefit from the material covered. This book will also be of interest to researchers and first and second year graduate students working in semiconductor devices and IC reliability fields., Springer<
Springer.com
Nr. 978-0-7923-9505-8. Custos de envio:Worldwide free shipping, , DE. (EUR 0.00) Details...
(*) Livro esgotado significa que o livro não está disponível em qualquer uma das plataformas associadas buscamos.
Carlos H. Diaz/ Charvaka Duvvury/ Sung-Mo (Steve) Kang/ Sung-Mo Kang: Modeling of Electrical Overstress in Integrated Circuits - encadernada, livro de bolso
Modeling of Electrical Overstress in Integrated Circuits ab 181.99 € als gebundene Ausgabe: Auflage 1995. Aus dem Bereich: Bücher, Wissenschaft, Technik, Medien > Bücher, Springer US
Hugendubel.de
Nr. 4044454. Custos de envio:, , DE. (EUR 0.00) Details...
(*) Livro esgotado significa que o livro não está disponível em qualquer uma das plataformas associadas buscamos.
Electrical overstress (EOS) and Electrostatic discharge (ESD) pose one of the most dominant threats to integrated circuits (ICs). These reliability concerns are becoming more serious with… mais…
Electrical overstress (EOS) and Electrostatic discharge (ESD) pose one of the most dominant threats to integrated circuits (ICs). These reliability concerns are becoming more serious with the downward scaling of device feature sizes. Modeling of Electrical Overstress in Integrated Circuits presents a comprehensive analysis of EOS/ESD-related failures in I/O protection devices in integrated circuits. The design of I/O protection circuits has been done in a hit-or-miss way due to the lack of systematic analysis tools and concrete design guidelines. In general, the development of on-chip protection structures is a lengthy expensive iterative process that involves tester design, fabrication, testing and redesign. When the technology is changed, the same process has to be repeated almost entirely. This can be attributed to the lack of efficient CAD tools capable of simulating the device behavior up to the onset of failure which is a 3-D electrothermal problem. For these reasons, it is important to develop and use an adequate measure of the EOS robustness of integrated circuits in order to address the on-chip EOS protection issue. Fundamental understanding of the physical phenomena leading to device failures under ESD/EOS events is needed for the development of device models and CAD tools that can efficiently describe the device behavior up to the onset of thermal failure. Modeling of Electrical Overstress in Integrated Circuits is for VLSI designers and reliability engineers, particularly those who are working on the development of EOS/ESD analysis tools. CAD engineers working on development of circuit level and device level electrothermal simulators will also benefit from the material covered. This book will also be of interest to researchers and first and second year graduate students working in semiconductor devices and IC reliability fields. | Modeling of Electrical Overstress in Integrated Circuits by Carlos H. Diaz Hardcover | Indigo Chapters Books > Science & Nature > Science > Technology > Electronics P10117, Carlos H. Diaz<
new in stock. Custos de envio:zzgl. Versandkosten., mais custos de envio
Electrical overstress (EOS) and Electrostatic discharge (ESD) pose one of the most dominant threats to integrated circuits (ICs). These reliability concerns are becoming more serious wi… mais…
Electrical overstress (EOS) and Electrostatic discharge (ESD) pose one of the most dominant threats to integrated circuits (ICs). These reliability concerns are becoming more serious with the downward scaling of device feature sizes. Modeling of Electrical Overstress in Integrated Circuits presents a comprehensive analysis of EOS/ESD-related failures in I/O protection devices in integrated circuits. The design of I/O protection circuits has been done in a hit-or-miss way due to the lack of systematic analysis tools and concrete design guidelines. In general, the development of on-chip protection structures is a lengthy expensive iterative process that involves tester design, fabrication, testing and redesign. When the technology is changed, the same process has to be repeated almost entirely. This can be attributed to the lack of efficient CAD tools capable of simulating the device behavior up to the onset of failure which is a 3-D electrothermal problem. For these reasons, it is important to develop and use an adequate measure of the EOS robustness of integrated circuits in order to address the on-chip EOS protection issue. Fundamental understanding of the physical phenomena leading to device failures under ESD/EOS events is needed for the development of device models and CAD tools that can efficiently describe the device behavior up to the onset of thermal failure. Modeling of Electrical Overstress in Integrated Circuits is for VLSI designers and reliability engineers, particularly those who are working on the development of EOS/ESD analysis tools. CAD engineers working on development of circuit level and device level electrothermal simulators will also benefit from the material covered. This book will also be of interest to researchers and first and second year graduate students working in semiconductor devices and IC reliability fields. Books > Science & Nature > Science > Technology > Electrical List_Books, [PU: Kluwer Academic Publishers]<
new in stock. Custos de envio:zzgl. Versandkosten., mais custos de envio
Electrical overstress (EOS) and Electrostatic discharge (ESD) pose one of the most dominant threats to integrated circuits (ICs). These reliability concerns are becoming more serious with… mais…
Electrical overstress (EOS) and Electrostatic discharge (ESD) pose one of the most dominant threats to integrated circuits (ICs). These reliability concerns are becoming more serious with the downward scaling of device feature sizes. Modeling of Electrical Overstress in Integrated Circuits presents a comprehensive analysis of EOS/ESD-related failures in I/O protection devices in integrated circuits. The design of I/O protection circuits has been done in a hit-or-miss way due to the lack of systematic analysis tools and concrete design guidelines. In general, the development of on-chip protection structures is a lengthy expensive iterative process that involves tester design, fabrication, testing and redesign. When the technology is changed, the same process has to be repeated almost entirely. This can be attributed to the lack of efficient CAD tools capable of simulating the device behavior up to the onset of failure which is a 3-D electrothermal problem. For these reasons, it is important to develop and use an adequate measure of the EOS robustness of integrated circuits in order to address the on-chip EOS protection issue. Fundamental understanding of the physical phenomena leading to device failures under ESD/EOS events is needed for the development of device models and CAD tools that can efficiently describe the device behavior up to the onset of thermal failure. Modeling of Electrical Overstress in Integrated Circuits is for VLSI designers and reliability engineers, particularly those who are working on the development of EOS/ESD analysis tools. CAD engineers working on development of circuit level and device level electrothermal simulators will also benefit from the material covered. This book will also be of interest to researchers and first and second year graduate students working in semiconductor devices and IC reliability fields., Springer<
Nr. 978-0-7923-9505-8. Custos de envio:Worldwide free shipping, , DE. (EUR 0.00)
Carlos H. Diaz/ Charvaka Duvvury/ Sung-Mo (Steve) Kang/ Sung-Mo Kang: Modeling of Electrical Overstress in Integrated Circuits - encadernada, livro de bolso
Modeling of Electrical Overstress in Integrated Circuits ab 181.99 € als gebundene Ausgabe: Auflage 1995. Aus dem Bereich: Bücher, Wissenschaft, Technik, Medien > Bücher, Springer US
1Como algumas plataformas não transmitem condições de envio e estas podem depender do país de entrega, do preço de compra, do peso e tamanho do item, de uma possível adesão à plataforma, de uma entrega direta pela plataforma ou através de um fornecedor terceirizado (Marketplace), etc., é possível que os custos de envio indicados pela terralivro não correspondam aos da plataforma ofertante.
Dados bibliográficos do melhor livro correspondente
Electrical overstress (EOS) and Electrostatic discharge (ESD) pose one of the most dominant threats to integrated circuits (ICs). These reliability concerns are becoming more serious with the downward scaling of device feature sizes. Modeling of Electrical Overstress in Integrated Circuits presents a comprehensive analysis of EOS/ESD-related failures in I/O protection devices in integrated circuits. The design of I/O protection circuits has been done in a hit-or-miss way due to the lack of systematic analysis tools and concrete design guidelines. In general, the development of on-chip protection structures is a lengthy expensive iterative process that involves tester design, fabrication, testing and redesign. When the technology is changed, the same process has to be repeated almost entirely. This can be attributed to the lack of efficient CAD tools capable of simulating the device behavior up to the onset of failure which is a 3-D electrothermal problem. For these reasons, it is important to develop and use an adequate measure of the EOS robustness of integrated circuits in order to address the on-chip EOS protection issue. Fundamental understanding of the physical phenomena leading to device failures under ESD/EOS events is needed for the development of device models and CAD tools that can efficiently describe the device behavior up to the onset of thermal failure. Modeling of Electrical Overstress in Integrated Circuits is for VLSI designers and reliability engineers, particularly those who are working on the development of EOS/ESD analysis tools. CAD engineers working on development of circuit level and device level electrothermal simulators will also benefit from the material covered. This book will also be of interest to researchers and first and second year graduate students working in semiconductor devices and IC reliability fields.
Dados detalhados do livro - Modeling of Electrical Overstress in Integrated Circuits by Carlos H. Diaz Hardcover | Indigo Chapters
EAN (ISBN-13): 9780792395058 ISBN (ISBN-10): 0792395050 Livro de capa dura Ano de publicação: 1994 Editor/Editora: Carlos H. Diaz 178 Páginas Peso: 0,438 kg Língua: eng/Englisch
Livro na base de dados desde 2007-11-06T15:07:32-02:00 (Sao Paulo) Página de detalhes modificada pela última vez em 2023-09-27T08:01:24-03:00 (Sao Paulo) Número ISBN/EAN: 0792395050
Número ISBN - Ortografia alternativa: 0-7923-9505-0, 978-0-7923-9505-8 Ortografia alternativa e termos de pesquisa relacionados: Autor do livro: carlos, diaz diaz, kim sung, kang Título do livro: modeling electrical overstress integrated circuits, integrated science, springer
Dados da editora
Autor: Carlos H. Diaz; Sung-Mo (Steve) Kang; Charvaka Duvvury Título: The Springer International Series in Engineering and Computer Science; Modeling of Electrical Overstress in Integrated Circuits Editora: Springer; Springer US 148 Páginas Ano de publicação: 1994-11-30 New York; NY; US Língua: Inglês 160,49 € (DE) 164,99 € (AT) 177,00 CHF (CH) Available XXV, 148 p.
BB; Hardcover, Softcover / Technik/Elektronik, Elektrotechnik, Nachrichtentechnik; Schaltkreise und Komponenten (Bauteile); Verstehen; VLSI; development; integrated circuit; material; modeling; semiconductor; semiconductor devices; simulation; tables; testing; Electronic Circuits and Systems; Electrical and Electronic Engineering; Elektrotechnik; BC
1 Electrical Overstress in ICS.- 1.1 Definition of Electrostatic Discharge Phenomena.- 1.2 Impact of ESD on IC Chip Technologies.- 1.3 Protection Strategies for Reducing ESD Effects.- 1.4 ESD Models and Qualification.- 1.5 EOS Models and Qualification.- 1.6 Previous Work on ESD/EOS Device Failure Modeling.- 2 NMOS ESD Protection Devices and Process Related Issues.- 2.1 ESD Phenomena in nMOS Devices.- 2.2 Failure Modes in nMOS.- 2.3 Protection Technique Using nMOS Device Structures.- 2.4 The Impact of Process Technologies on nMOS ESD Behavior.- 2.5 Advance nMOS Device Protection Concepts.- 3 Measuring EOS Robustness in ICS.- 3.1 Statistical Distribution of EOS/ESD-related Failures.- 3.2 Characterization of Bipolar Devices.- 3.3 EOS Characterization of nMOS Devices.- 3.4 Summary.- 4 Eos Thermal Failure Simulation for Integrated Circuits.- 4.1 Nomenclature.- 4.2 ITSIM: A Nonlinear Thermal Failure Simulator for ICs.- 4.3 Simulation Results for Ceramic and Plastic Packages.- 4.4 Summary.- 5 ITSIM: A Nonlinear 2D - 1D Thermal Simulator.- 5.1 Introduction.- 5.2 Running the Program.- 5.3 Input File.- 5.4 An Example.- 6 2D Electrothermal Analysis of Device Failure in Mos Processes.- 6.1 Device Level Electrothermal Simulation.- 6.2 Comparison of Experimental and 2D Electrothermal Results.- 6.3 Summary.- 7 Circuit-Level Electrothermal Simulation.- 7.1 Temperature Effects and Device Models.- 7.2 Simulation of Avalanche Breakdown.- 7.3 Temperature Model for Electrothermal Simulation.- 7.4 iETSIM: An Electrothermal Circuit-Level Simulation Tool.- 7.5 Summary.- 8 IETSIM : An Electrothermal Circuit Simulator.- 8.1 Introduction.- 8.2 Running the Program.- 8.3 Input File: Circuit Description and Format.- 8.4 Low Temperature Thermometer Example.- 9 Summary and Future Research.- 9.1 Summary.- 9.2 Future Research.- About the Authors.
Outros livros adicionais, que poderiam ser muito similares com este livro: